Flex banner printing in Dubai starts at AED 35, fence and hoarding banners at AED 45 in flex or AED 55 in mesh, and a reusable 2.4 × 2.4 m adjustable banner stand is AED 1,950 — all VAT inclusive, all made to your size. If you are branding a construction hoarding, hanging a banner over an event entrance or wrapping a building façade, the decision that determines whether the job survives the season is not the print quality. It is whether you chose flex or mesh, and whether the edge finish matches the wind at your site.
This guide covers both: the material and finishing decisions that engineers care about, and the real prices a marketing manager needs to build a budget. Everything referenced here is made to order, so the figures are starting prices confirmed against your finished size in the quote.
Flex or mesh: the one decision that matters
Flex is a solid PVC sheet. Colours are denser, the print reads like a poster, and it blocks the view behind it completely — which is exactly the point on a construction hoarding where you are hiding a site. Because it is solid, wind pushes against the whole surface, so it needs a sheltered run or a genuinely strong fence.
Mesh is perforated with thousands of small holes so wind passes through instead of pulling on the fixings. On an exposed site, a long perimeter run, a rooftop or anywhere near the coast, mesh is the material that survives the season — a flex banner in the same position tears at the eyelets first, usually within weeks. The trade-off is a slightly softer image, because a percentage of the surface is holes.
The short rule: short run, sheltered, maximum image quality → flex. Long run, open site, wind → mesh. In Dubai specifically, anything along Sheikh Zayed Road, on a coastal plot, on a podium roof or facing an open desert lot should be mesh unless there is a reason it cannot be.
Prices: fence banners in flex from AED 45, fence banners in mesh from AED 55. Both come with eyelets so they go up with cable ties and a ladder — no frame, no installer.
Fabric banners: the four material choices
Flex and fabric banners from AED 35 cover indoor banners, event backdrops, hanging banners and pole banners. There are four surfaces worth knowing:
- Knitted polyester — light, breathable, with a slight give. The default for indoor banners and event backdrops, and the cheapest to ship because it folds into nothing.
- Satin, gloss — smoother surface and richer colour. Gloss lifts photographs, so this is the choice when the banner carries a hero image rather than type.
- Satin, matt — the same richness without the reflection. Specify matt for anything under spotlights or anything that will be on camera, because gloss under a stage light produces a hotspot exactly where your logo is.
- Block out — an opaque core so nothing shows through from the other side. Mandatory for double-sided banners, and for any banner hung against a window or a lit surface.
Edge finish — where banners actually fail
- Clean cut — cheapest, for short-term indoor use only. It will fray if it moves.
- Hem — folded and stitched edge that stops fraying. The standard finish and the right default.
- Reinforced — webbing sewn into the hem. This is the outdoor and windy-site specification, and it is the single upgrade most worth paying for in the UAE.
- Velcro — for fixing to frames and reusable structures.
Hanging options
- Grommets — metal eyelets for rope or cable ties. The universal choice for fences and railings.
- Rope sewn — rope inside the hem, for tensioning a banner across a span so it does not sag in the middle.
- Pole pocket — a sleeve top and bottom for a pole or bar. Use it for anything hung over a walkway.
- D-ring — for hanging from ceilings and truss in ballrooms and exhibition halls.
Banner styles
- X banner — free-standing on an X frame, for entrances and reception points.
- Pennant banner — tapered shape for street poles and pathways.
- Hanging banner — suspended from ceiling or truss over an aisle or stand.
Three combinations cover almost every brief. Indoor, short event: knitted polyester, hem, grommets. Outdoors or exposed to wind: block out or satin, reinforced hem, grommets or rope sewn. Hung over a walkway with people on both sides: block out, double-sided print, pole pocket or D-ring.
Building wraps and hoarding: what changes at scale
A building wrap is the same printing process at a size where physics starts to dominate. Three things change.
It is printed in panels, not as one sheet. For long runs and tall façades we print overlapping panels rather than one enormous piece. That is not a compromise — panels are easier to carry to the fifth floor, easier to tension, and if one is damaged you replace one panel instead of the whole wrap. Ask for the panel layout with the proof so the seams fall where you want them, not through the middle of your logo.
Mesh becomes close to non-negotiable. At façade height the wind load on a solid sheet is a structural question, not a print question. Mesh is standard on building wraps for exactly this reason.
Eyelet spacing gets tighter. Eyelets every 50 cm along the edges is the normal spacing. On an exposed run, ask for closer spacing — and then actually fix every one. Most failed banners in the UAE failed because half the eyelets were left unfixed to save twenty minutes.
On permits: a banner or wrap on a building façade, on hoarding facing a public road, or visible from outside your plot generally needs approval — from Dubai Municipality, or from the relevant free zone or master-community authority — plus a landlord or main-contractor NOC and a dimensioned drawing. Allow two to four weeks and confirm current requirements with the authority, because rules and fees change. Interior banners inside your own leased space do not need a municipality permit, though building management usually wants to see what is going up. Our guide to indoor and outdoor signage in Dubai covers the exterior approvals side in more detail.
UAE sun: what happens to outdoor print over a year
Print is UV-resistant and colours hold through a Dubai summer outdoors. The honest caveat is that strong reds and deep blues are always the first to shift on any outdoor print, on any press, anywhere. If your banner has to match brand colours exactly for twelve months or more — a compliance requirement on a developer hoarding, for example — say so when you order and we will advise on the ink and finish rather than letting you discover it in month eight.
Practical planning figure: for a campaign banner, one season is the design life you should budget against. For a hoarding that must last the whole build, plan a mid-project reprint into the budget from day one. It is far cheaper than an emergency reprint the week the developer walks the site.
Real prices: banners and outdoor branding in Dubai
All VAT inclusive. Made-to-size items are shown at their starting price and confirmed against your finished dimensions in the quote — send the size and you get a firm figure the same day.
| Item | Use case | From (VAT incl.) |
|---|---|---|
| Flex / fabric banner | Indoor banners, backdrops, hanging banners | AED 35 |
| Fence banner — flex | Hoarding, sheltered runs, maximum colour | AED 45 |
| Fence banner — mesh | Exposed sites, long runs, building wraps | AED 55 |
| Flag base | Weighted base for flags and pole banners | AED 135 |
| Bunting — knitted polyester | 20 A5 flags with rope, events and forecourts | AED 525 |
| Bunting — taffeta satin, double-sided | 20 A5 flags, both faces printed | AED 625 |
| Conference flags — hanging | Ballrooms, summits, truss-hung sets | AED 850 |
| Outdoor heavy-duty backdrop | Outdoor stages and step-and-repeat walls | AED 1,950 |
| Adjustable banner stand 2.4 × 2.4 m | Reusable frame — reprint only the graphic | AED 1,950 |
| Seamless fabric backdrop — outdoor | No visible seams, premium outdoor stage | AED 2,150 |
| Printed outdoor tent 3 × 3 m | Branded shade for activations and site events | AED 3,450 |
Browse the ranges: flex banner, banners and fence banners. For roll-up stands and pull-up banners, see the roll-up banner sizes and prices guide; for flags, the beach flag, L-shape and teardrop guide.
Artwork for large format: three rules
Send it at scale, and say what the scale is. A print-ready PDF or AI file at 1:10 is completely fine for a 10-metre banner — just label it. What causes delays is an unlabelled file where nobody is sure whether 1,200 mm means the artboard or the banner.
Design for the viewing distance, which is enormous. The reader is across a six-lane road or at the far end of a hall. That allows one headline, one logo, one number. Everything else is decoration you are paying to print. Our print-ready artwork checklist covers bleed, safe margins and resolution at large sizes.
Keep content out of the hem and eyelet zone. Anything within about 5 cm of the edge on a hemmed banner can be folded into the hem or punched through by an eyelet. Give the layout a generous margin, and never place the logo in a corner.
How to order
- Send three facts: the finished size, where it will hang, and for how long. Those three determine material, edge finish and fixing — and they are all we need to quote.
- Send artwork or just the logo on WhatsApp +971 52 210 0909 or call 0522100909. Our designers prepare the artwork free of charge and send a proof before anything is printed.
- Approve the proof — including the panel layout on anything large, so you know where the seams fall.
- Delivery. Free inside Dubai on orders above AED 800; outside Dubai and across the GCC quoted by address and quantity. Collection is also available from 32 Sheikh Zayed Road, Office 706, Dubai — open every day except Sunday, 09:00–21:00.
All prices include 5% VAT. Payment is 100% in advance: card, bank transfer, or four instalments with Tabby or Tamara. Contractors and agencies working on LPOs should set up a corporate account first.
Frequently asked questions
How much does a flex banner cost in Dubai?
Flex and fabric banners start at AED 35, fence and hoarding banners at AED 45 in flex and AED 55 in mesh, all VAT inclusive and made to your size. Because every banner is cut to your dimensions, the final price depends on the finished size, the material, the edge finish and the fixings — send the size on WhatsApp for a firm quote the same day.
Flex or mesh for a construction hoarding?
Mesh if the run is long, the site is open, it is near the coast, or the banner is going up high. Flex if the run is short and sheltered and image quality is the priority — for example a hoarding panel inside a mall or a covered podium. On an exposed Dubai site, flex tears at the eyelets long before the print fades.
How long will an outdoor banner last in the UAE sun?
Print is UV-resistant and holds through a summer outdoors. Budget one season as the design life for a campaign banner, and plan a mid-project reprint for a hoarding that has to stand for a whole build. Strong reds and deep blues shift first; tell us if exact colour matching has to hold for a year or more.
Can you print a banner large enough to cover a building?
Yes — large runs are printed as overlapping panels rather than one sheet, which is both standard practice and the more practical option for handling, tensioning and replacing a damaged section. Ask for the panel layout with your proof so seams do not land on your logo. See also our large format printing guide for materials and maximum sizes.
Do I need a permit for a banner in Dubai?
For anything on a façade, on hoarding facing a public road, or visible from outside your plot: generally yes — approval from Dubai Municipality or the relevant free zone authority, plus a landlord or main-contractor NOC. Allow two to four weeks and confirm current requirements directly with the authority, as rules and fees change. Interior banners inside your own space do not need a municipality permit.
What is the cheapest way to run four banner campaigns a year?
Buy the structure once and reprint only the graphic. An adjustable banner stand at AED 1,950 is reusable indefinitely, and from the second campaign onward you are paying banner prices rather than structure prices. The same logic applies to printed outdoor tents and backdrop frames.
How many eyelets do I need?
Every 50 cm along the edges is standard. On an exposed run ask for closer spacing — and fix every single one. Skipping alternate eyelets to save installation time is the most common cause of a banner failing in its first month.
Get your banner priced today
Send the finished size, where it is going and how long it needs to last on WhatsApp +971 52 210 0909 or call 0522100909, and you will have a VAT-inclusive quote with the right material and edge finish specified the same day. Start from the flex banner collection for indoor and event work, or banners and fence banners for hoarding, perimeters and building wraps.
