Velvet business cards — also sold as soft-touch or suede-laminated cards — cost roughly two to three times a standard matt card in Dubai, and the reason people keep ordering them is physical, not visual: the card grips the fingers instead of sliding off them. A 500-card run in velvet with spot UV is AED 279; the same 500 cards in ordinary matt lamination are under AED 120. This guide covers what the finish actually does, which thickness it needs to work, the real prices at every tier, and how to order without wasting a print run.

What velvet lamination is (and what it isn't)

Velvet is a matt plastic film applied over the printed card. Under a microscope it is textured rather than smooth, and that microtexture is what your fingers read as suede. It is not a paper stock, not an uncoated card, and not the same thing as ordinary matt lamination.

The difference from standard matt film matters more than most buyers expect. Matt lamination kills glare and nothing else. Velvet kills glare, adds drag under the thumb, and — this is the part people notice — deepens dark colours. A black velvet card reads visibly richer than the identical black on matt film, because the surface scatters light instead of bouncing a grey sheen back at you.

If you are still deciding between finishes in general, our complete lamination guide compares matte, glossy and soft-touch across every print job, not just cards.

Why velvet only works on thick stock

A soft-touch finish on a thin card feels wrong — the hand expects weight to go with the texture and doesn't get it. That is why every velvet card in our velvet business cards range is built on 760 micron stock, roughly double a standard business card, or on 700 GSM for the heaviest tier. We do not offer velvet film on 350 GSM: the finish is half the effect, and the weight is the other half.

Real prices: velvet business cards in Dubai (2026)

All prices below are live store prices and include 5% VAT. Free artwork preparation and a proof for approval are included at every tier.

Card specification Quantity Price (AED, VAT incl.) Per card
Velvet lamination + spot UV, rounded corners, 760 micron 500 pcs 279 0.56
Velvet lamination + spot UV, rounded corners, 760 micron 1,000 pcs 339 0.34
Velvet + gold foil + spot UV, rounded corners, 760 micron 500 pcs 389 0.78
Velvet + gold foil + spot UV, rounded corners, 760 micron 1,000 pcs 489 0.49
Velvet + spot UV, 700 GSM ultra-thick 250 pcs 900 3.60
Velvet + spot UV, 700 GSM ultra-thick 500 pcs 1,000 2.00
Velvet + spot UV, 700 GSM ultra-thick 1,000 pcs 1,320 1.32
Velvet + 3D foil + 3D spot UV, rounded corners 200 pcs 1,020 5.10
Velvet + 3D foil + 3D spot UV, rounded corners 500 pcs 1,230 2.46
Velvet + 3D foil + 3D spot UV, rounded corners 1,000 pcs 1,750 1.75

Read the per-card column before you pick a quantity. On the standard velvet + spot UV card, 500 pieces cost AED 0.56 each and 1,000 cost AED 0.34 each — the second 500 cards add AED 60 to the invoice. If more than one person in the company needs cards, print the thousand.

How velvet compares to the rest of the range

Useful context if you are weighing the upgrade. These are from the wider business card printing range, all at 1,000 pieces:

Finish (1,000 cards) Price (AED, VAT incl.) Per card
Art paper, no lamination 89 0.09
Glossy lamination, 350 GSM 139 0.14
Matt lamination, 350 GSM 170 0.17
Matt lamination + rounded corners 159 0.16
Matt lamination + spot UV 290 0.29
Matt lamination + gold foil 299 0.30
PET glossy, 760 micron thick 289 0.29
Velvet + spot UV, 760 micron 339 0.34

The honest read: the jump from a matt card to a velvet card at 1,000 pieces is AED 169 — about the cost of one business lunch. It is one of the cheapest perceived-quality upgrades available in print, which is exactly why real estate brokerages, clinics, law firms and hospitality groups in Dubai default to it.

What to pair with velvet

Spot UV

Gloss varnish applied to the logo only. The contrast between a wet-looking mark and a suede background is the single most effective use of the finish, and it is why our standard velvet card includes it rather than offering it as an extra. If you want the mechanics of how spot UV, foiling and embossing differ, we covered that in detail in our premium card finishes guide.

Gold or silver foil

Real metallic foil stamped into the card. On glossy stock, foil competes with the surface shine and loses some of its impact. On velvet it has nothing to compete with — the matt ground makes the metal the only reflective thing on the card. AED 489 for 1,000 cards with both foil and spot UV.

3D foil and 3D spot UV

The top tier. The varnish is built up in layers so you can feel the logo standing proud of the surface, and the foil is domed rather than flat. At AED 1,750 for 1,000 cards it is a deliberate statement, and it is the right choice for maybe one card in fifty — founders, partners, anyone whose card is handed across a table in a negotiation rather than dropped in a fishbowl.

Rounded corners

Included on every velvet card we print, and not just for looks. Square corners on a thick card scuff, and scuffing shows far more on matt film than on gloss. Rounding the corners removes the part of the card most likely to look tired after two weeks in a wallet.

The one drawback, stated plainly

Velvet film shows fingerprints and fine scratches more than gloss does, and it shows them most on large solid dark areas. For a card that lives in a wallet and gets handed over once, this is irrelevant. For a card you will hand out from an open desk box for six months, avoid a full-bleed black face — break it up with white space, a lighter panel, or keep the dark colour on one side only.

The second thing to know: velvet is difficult to write on with a ballpoint. If your team writes mobile numbers or appointment times on the back of cards — common for clinics and salons — leave an unlaminated or lighter panel on the reverse and tell us when you order.

Artwork: what to send

Send a print-ready PDF at 90 × 55 mm with 3 mm bleed on all sides and all text at least 4 mm inside the trim line. Build the file in CMYK, not RGB — if you are unsure why that matters, our CMYK vs RGB guide explains what shifts and why.

For spot UV or foil, supply a separate layer marking exactly which elements are treated — 100% black shapes on their own layer, named clearly. Do not assume we will guess which parts of the logo should be glossy; we will ask, and asking costs a day.

Don't have print-ready artwork? Send the logo in whatever format you have. We prepare the file free of charge and send a proof for approval before anything goes on press.

How to order

  1. Pick the specification and quantity from the velvet business cards collection — or send us the brief and we will tell you which tier fits.
  2. Send artwork or logo by WhatsApp on +971 52 210 0909 or call 0522100909.
  3. Approve the proof. Check the spelling of names, the mobile number digits and the trade licence details. Approval locks the file — changes after this restart the clock.
  4. Production and delivery. Standard turnaround is 3–5 working days from proof approval for velvet cards; foil and 3D finishes sit at the upper end of that. Delivery is free inside Dubai on orders above AED 800. Outside Dubai and across the GCC we quote by address and quantity.

Frequently asked questions

Is velvet lamination the same as soft-touch or suede lamination?

Yes — three names for the same film. Some printers also call it silk-touch or touch-me lamination. If a quote you are comparing uses any of those terms, it is the same product; compare the card thickness and whether spot UV is included, because that is where quotes actually differ.

How thick are your velvet business cards?

The standard velvet range is 760 micron — about double a normal business card. There is also a 700 GSM ultra-thick tier (AED 1,000 for 500 cards) for when the weight itself is the message. We do not print velvet on 350 GSM stock.

What is the minimum order for velvet business cards?

200 pieces on the 3D foil tier, 100 pieces on the 700 GSM ultra-thick tier, and 500 pieces on the standard velvet + spot UV card. Low quantities carry a high per-card cost because the setup — plates, foil dies, spot UV screens — is the same whether you print 100 cards or 1,000. Our guide to printing MOQs in Dubai explains where that cost sits.

Can I print velvet cards with a QR code?

Yes, and they scan well — the matt surface actually helps, because gloss can throw glare into a phone camera under office lighting. Keep the code at least 20 mm square and leave a clear quiet zone around it. See our QR code design rules before you place one on a card.

How long do velvet business cards take to print in Dubai?

3–5 working days from proof approval for standard velvet with spot UV. Gold foil adds a day for the die. 3D foil and 3D spot UV run 5–7 working days. If you have a conference date, tell us the date rather than asking for rush service — we will work backwards and tell you honestly whether it is possible.

Should I choose velvet or a metal business card?

Different jobs. Velvet is a premium version of a normal card: you can print 1,000 and hand them out freely. Metal is a single-card object you give to perhaps twenty people a year. If you want the comparison with real numbers, see our guide to metal business cards in Dubai.

Order your velvet business cards

Browse the full velvet business cards collection for live prices at every quantity, or send your logo straight to WhatsApp on +971 52 210 0909 — we will prepare the artwork free, send a proof, and print once you approve. Call 0522100909 if you would rather talk it through. All prices include VAT, and delivery inside Dubai is free on orders above AED 800.

Business cards, Dubai printing, Print finishes, Spot uv, Velvet lamination